MOVIEMAGIC HDMI DISTRIBUTION SPLITTER***1 X 8 |
|
HDMI 1:8 SPLITTER
INTRODUCTION
The Moviemagic HDMI Distribution Amplifier (1X8) is an eight outputs HDMI splitter. It distributes the HDMI input into eight identical outputs. These eight outputs are synchronized.
The unit has the ability of buffering and amplifying each unit’s output to achieve long distance transmission of HDMI signal up to 15 meters.
When two or more units are cascaded, they can be used to create a larger distribution and longer length.
The unit also offers solutions for HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
FEATURES
* Easy to Use: Install in seconds, no need for setting.
* Distribution: 8 identical HDMI outputs.
* Cascaded: Large distribution achieved by cascading.
CONNECT AND OPERATE
1) Connect the HDMI input source into unit (Input cables are optional)
*please refer to connection diagram section.
2) Insert the DC side of 5v power supply into unit and then
connect the AC side of the power supply into the wall outlet.
3) Turn on the power.
SPECIFICATIONS
|
Signal Inputs/Output
|
|
|
Input Video Signal
|
0.5 -1.0 volts p-p
|
|
Input DDC Signal
|
5 volts p-p (TTL)
|
|
Maximum Single Link Range
|
1920X1200, 1080P
|
|
Output Video
|
HDMI 1.2a+ HDCP1.0/1.1
|
|
Video format supported
|
|
|
VGA
|
640x480,800x600,1024x768,1920x1200
|
|
DTV/HDTV
|
480i/576i/480p/576p/720p/1080i/1080P
|
|
Digital Signal I/O
|
|
|
HDMI Compliance
|
HDMI 1.3
|
|
Operating Frequency
|
|
|
Frequency
|
Up to165MHz
|
|
Resolutions(HDTV)
|
|
|
Interlaced(50&60Hz)
|
480i,576i,1080i
|
|
Progressive(50&60Hz)
|
480p,576p,720p,1080p
|
|
Mechanical
|
|
|
Size(H-W-D)
|
Different models have different sizes
|
|
Weight(Net)
|
Different models have different weight
|
|
Warranty
|
|
|
Limited Warranty
|
1 Year Parts and Labor
|
|
Environmental
|
|
|
Operating Temperature
|
0? to +70?
|
|
Operating Humidity
|
10% to 85 % RH (no condensation)
|
|
Storage Temperature
|
-10? to +80?
|
|
Storage Humidity
|
5% to 90 % RH (no condensation)
|
|
Power Requirement
|
|
|
External Power Supply
|
5V DC@2A,except 1*4(2.5A)1*8(3A)
|
|
Regulatory Approvals
|
|
|
Converter Unit
|
FCC,CE,UL
|
|
Power Supply
|
UL,CE,FCC
|
|
**May need 2 to 3 pin adapter for euro plug
|
|
|
|
|
|
User Manual
|
|
|
|
| 4x2 HDMI SPLITTER/SWITCHER,1080p,1.3B,DEEPCOLOR SUPPORT |
|
4x2 HDMI Splitter Switch
Introduction
HSS0402 Matrix routes high definition video in multiple resolutions up to 1080p plus multichannel digital audio from any of the four HDMI sources to two displays.
Two outputs give you the choices of sending high definition audio and video signals up to two displays. Any four to any two matrix switching allows for maximum versatility for integrated systems.
The 4x2 HDMI Switcher eliminates the need to disconnect and reconnect sources to a display equipped with one input. It works with HD-DVD players, Blue Ray DVD, PS3, and satellite set top boxes that connect to two HDMI displays.
Every source is accessible at all times by any display by selecting it with an IR remote.
Features
The series of the HDMI Amplifier Splitter have many features that enable them to perform in a superior manner.Among those features you will find:
1.Switch easily between any four HDMI sources
2.Distributes any of the four inputs to any or any combination of the two HDMI output displays
3.Maintains high resolution video-beautiful, sharp HDTV resolutions up to 1080p
4.Discrete IR remote (included)
5.HDMI support 1.3b
6.HDCP support 1.0/1.1
SPECIFICATIONS
|
Signal Inputs/Output
|
|
|
HDMI Connector
|
type A 19 pin female
|
|
Input DDC Signal
|
5 volts p-p (TTL)
|
|
Maximum
Single
Link
Range
|
1080p
|
|
Operating Frequency
|
|
|
Video Amplifier Bandwidth
|
2.25Gbps/225MHz
|
|
Frequency
|
Up to225MHz
|
|
Resolutions(HDTV)
|
|
|
Interlaced(50&60Hz)
|
480i,576i,1080i
|
|
Progressive(50&60Hz)
|
480p,576p,720p,1080p
|
|
Mechanical
|
|
|
Size(H-W-D)
|
110mmW x 25mmH x 260mmD
|
|
Weight(Net)
|
0.854KGs
|
|
Warranty
|
|
|
Limited Warranty
|
1 Year Parts and Labor
|
|
Environmental
|
|
|
Operating Temperature
|
0 ¡æ to +70¡æ
|
|
Operating Humidity
|
10% to 85 % RH (no condensation)
|
|
Storage Temperature
|
-10¡æ to +80¡æ
|
|
Storage Humidity
|
5% to 90 % RH (no condensation)
|
|
Power Requirement
|
|
|
External Power Supply
|
5V DC@2A
|
|
Power Consumption
|
10 watts (max)
|
|
Regulatory Approvals
|
|
|
Converter Unit
|
FCC,CE,UL
|
|
Power Supply
|
UL,CE,FCC
|
|
Accessories Adapter
|
|
|
AC Power Adapter
|
standard, standard and so on
|
|
User Manual
|
|
|
|
|
|
|
|
HDMI DISTRIBUTION AMPLIFER/SPLITTER , ONE INPUT TO TWO OUTPUTS
1:2
|
|
HDMI Distribution Amplifier(1X2)
INTRODUCTION
-The HSP0102 is a two outputs HDMI splitter
-It distributes the HDMI input into two identical outputs.
-These two outputs are synchronized.
- HSP0102 has the ability of buffering and amplifying
-Series connection of HSP0102 achieves long distance
transmission of HDMI signal of more than 15 meters
-When two or more HSP0102 are cascaded
they can be used to create a larger distribution
-HSP0102 offers solutions for HDTV retail and show site
-HDTV, STB, DVD and Projector factory, noise
-space and security concerns, data center control
-information distribution, conference room presentation
-school and corporate training environments.
-FEATURES
-Easy to Use: Install in seconds, no need for setting
-Distribution: 2 identical HDMI outputs
-Cascaded: Large distribution achieved by cascading HSP0102
-HDCP compliant.
CONNECT AND OPERATE
-Connect the HDMI input source into HSP0102. (Input cables are optional)
-please refer to connection diagram section.
-Insert the DC side of 5v power supply into HSP0102 and then connect the
-AC side of the power supply into the wall outlet.
-Turn on the power.
SPECIFICATIONS
|
Signal Inputs/Output
|
|
|
Input Video Signal
|
0.5 -1.0 volts p-p
|
|
Input DDC Signal
|
5 volts p-p (TTL)
|
|
Maximum
Single
Link
Range
|
1920X1200, 1080P
|
|
Output Video
|
HDMI 1.2a+ HDCP1.0/1.1
|
|
Video format supported
|
|
|
VGA
|
640x480,800x600,1024x768,1920x1200
|
|
DTV/HDTV
|
480i/576i/480p/576p/720p/1080i/1080P
|
|
Digital Signal I/O
|
|
|
HDMI Compliance
|
HDMI 1.2a
|
|
Operating Frequency
|
|
|
Frequency
|
Up to165MHz
|
|
Resolutions(HDTV)
|
|
|
Interlaced(50&60Hz)
|
480i,576i,1080i
|
|
Progressive(50&60Hz)
|
480p,576p,720p,1080p
|
|
Mechanical
|
|
|
Size(H-W-D)
|
Different models have different sizes
|
|
Weight(Net)
|
Different models have different weight
|
|
Warranty
|
|
|
Limited Warranty
|
1 Year Parts and Labor
|
|
Environmental
|
|
|
Operating Temperature
|
0¡æ to +70¡æ
|
|
Operating Humidity
|
10% to 85 % RH (no condensation)
|
|
Storage Temperature
|
-10¡æ to +80¡æ
|
|
Storage Humidity
|
5% to 90 % RH (no condensation)
|
|
Power Requirement
|
|
|
External Power Supply
|
5V DC@2A,except 1*4(2.5A)1*8(3A)
|
|
Regulatory Approvals
|
|
|
Converter Unit
|
FCC,CE,UL
|
|
Power Supply
|
UL,CE,FCC
|
|
Accessories Adapter
|
|
|
AC Power Adapter
|
standard, standard and so on
|
|
|
|
|
| MINI HDMI 3:1 SWITCHER,1080P,1.3B,DEEPCOLOR SUPPORT |
|
MINI 3:1 HDMI AUTO SWITCHER.
INTRODUCTION
This is a high performance mini HDMI Switcher.
It is compatible well for HD-DVD, STV,PS3, Xbox36etc.
The multiple resolutions can be up to & INCLUDING 1080p.
This kind of the HDMI Amplifier Switcher not only has the key-press-switching function, but also has the IR remote control and intelligent function.That is to say, as soon as the power supply of the source equipment is switched ,this switcher will respond automatically.
FEATURES:
Support HDMI 1.3b
Full HD 1080P
Support 12-bit Deep Color
High Performance up to 2.5Gbps
Supports 25Meters HDMI Cable on both ends of the Switcher
3 inputs
1 output
No power needed(If the input equipment is standard,otherwise power needed)
|
|
|
|
| MOVIEMAGIC HDMI SUPER EXTENDER BY CAT 6 |
|
MovieMagic HDMI Extender (By CAT-6 cable)-1080p at 60metres!
Benefits;-
1) The length of HDMI cable is fixed and unchangeable after it is produced. Because the HDMI connector can only be soldered or terminated by professional workers at point of manufacture,domestic users cannot alter the length easily. However CAT6 cables are available everywhere and be processed easily by the user or installer.
2) When cabling inside walls etc,hdmi is awkward. However, CAT-6 cable has no such problem.
3) By using this, the transmission distance can up to 60 meters for 1080P. For general HDMI cables, cables must be customized when the length over 10 meters.
Features
-One pair as a full functional module, no need of setting.
-Use CAT-6 cable to substitute HDMI cable to achieve long distance transmission.
-Follows the standard of IEEE-568B.
-Transmission distance reaches up to 60 meters.
-Auto-adjustment of feedback, equalization and amplify, the user does not need to care about
the length of the cable.
-Compact size.
-Signaling rates up to 2.25Gbits in support of 1080P display.
-Each port supports HDMI or DVI inputs.
-HDCP compliant.
PACKAGE CONTENTS
1) Main unit Moviemagic transmitter
2) Receiver
3) 5VDC Power Supply.
4) Operating Instructions.
CONNECT AND OPERATE
1) Connect the HDMI input sources such as:HD-DVD,PS3,STB etc.)
into the Moviemagic transmitter.
2) Connect two CAT-6 cables to both the outputs and inputs of the receiver..
3) Connect the HDMI output( such as : HD-LCD?HD-DLP)into the transmitter.
4) Plug the power into the Receiver.
SPECIFICATIONS
|
Signal Inputs/Output
|
|
|
Input Video Signal
|
0.5 -1.0 volts p-p
|
|
Input DDC Signal
|
5 volts p-p (TTL)
|
|
Maximum Single Link Range
|
1920X1200, 1080P
|
|
Output Video
|
HDMI 1.2a
|
|
Video format supported
|
|
|
DTV/HDTV
|
1080P/1080i/720P/576P/480P/576i/480i
|
|
Transmission distance
|
|
|
Using CAT6 Cable
|
60M for1080p
|
|
Using CAT6 Cable
|
120M for 1080i
|
|
Resolutions(HDTV)
|
|
|
Interlaced(50&60Hz)
|
480i,576i,1080i
|
|
Progressive(50&60Hz)
|
480p,576p,720p,1080p
|
|
Mechanical
|
|
|
Size(W-H-D)
|
45mmW x 25mmH x 81mmD
|
|
Weight(Net)
|
0.246KGs
|
|
Power Consumption
|
5Watts (max.)
|
|
Warranty
|
|
|
Limited Warranty
|
1 Year Parts and Labor
|
|
Environmental
|
|
|
Operating Temperature
|
0 to +70?
|
|
Operating Humidity
|
10% to 85 % RH (no condensation)
|
|
Storage Temperature
|
-10? to +80?
|
|
Storage Humidity
|
5% to 95 % RH (no condensation)
|
|
Power Requirement
|
|
|
External Power Supply
|
5V DC@2A
|
|
Regulatory Approvals
|
|
|
Converter Unit
|
FCC,CE,UL
|
|
Power Supply
|
UL,CE,FCC
|
|
Accessories Adapter
|
|
|
AC Power Adapter
|
Euro(**2 to 3 pin adapter not provided.)
|
|
User Manual
|
|
Notice:
1.In order to achieve the high transmission quality ,please choose the shielded CAT-5e or CAT-6 cable
2.The cables with lower quality will not achieve the perfect transmission effect and long distance
3.Theoretically the function of the product is normal when adopt short distance transmission.If the product cannot transmit long distance,this is to say,there are quality problems in the transmission cables
|
|
|
| MOVIEMAGIC HDMI EXTENDER BY CAT 5E/6 |
|
MovieMagic HDMI Extender (By CAT-5E cable)-1080p at 30metres!
Benefits;-
1) The length of HDMI cable is fixed and unchangeable after it is produced. Because the HDMI connector can only be soldered or terminated by professional workers at point of manufacture,domestic users cannot alter the length easily. However CAT5E cables are available everywhere and be processed easily by the user or installer.
2) When cabling inside walls etc,hdmi is awkward. However, CAT-5E cable has no such problem.
3) By using this, the transmission distance can up to 30 meters. For general HDMI cables, cables must be customized when the length over 10 meters.
Features
-One pair as a full functional module, no need of setting.
-Use CAT-5E cable to substitute HDMI cable to achieve long distance transmission.
-Follows the standard of IEEE-568B.
-Transmission distance reaches up to 30 meters.
-Auto-adjustment of feedback, equalization and amplify, the user does not need to care about
the length of the cable.
-Compact size.
-Signaling rates up to 2.25Gbits in support of 1080P display.
-Each port supports HDMI or DVI inputs.
-HDCP compliant.
PACKAGE CONTENTS
1) Main unit Moviemagic transmitter
2) Receiver
3) 5VDC Power Supply.
4) Operating Instructions.
CONNECT AND OPERATE
1) Connect the HDMI input sources such as:HD-DVD,PS3,STB etc.)
into the Moviemagic transmitter.
2) Connect two CAT-5E cables to both the outputs and inputs of the receiver..
3) Connect the HDMI output( such as : HD-LCD?HD-DLP)into the transmitter.
4) Plug the power into the Receiver.
SPECIFICATIONS
|
Signal Inputs/Output
|
|
|
Input Video Signal
|
0.5 -1.0 volts p-p
|
|
Input DDC Signal
|
5 volts p-p (TTL)
|
|
Maximum Single Link Range
|
1920X1200, 1080P
|
|
Output Video
|
HDMI 1.2a
|
|
Video format supported
|
|
|
DTV/HDTV
|
1080P/1080i/720P/576P/480P/576i/480i
|
|
Transmission distance
|
|
|
Using CAT6 Cable
|
30M for1080p
|
|
Using CAT5e/6 Cable
|
60M for 480p
|
|
Resolutions(HDTV)
|
|
|
Interlaced(50&60Hz)
|
480i,576i,1080i
|
|
Progressive(50&60Hz)
|
480p,576p,720p,1080p
|
|
Mechanical
|
|
|
Size(W-H-D)
|
45mmW x 25mmH x 81mmD
|
|
Weight(Net)
|
0.246KGs
|
|
Power Consumption
|
5Watts (max.)
|
|
Warranty
|
|
|
Limited Warranty
|
1 Year Parts and Labor
|
|
Environmental
|
|
|
Operating Temperature
|
0 to +70?
|
|
Operating Humidity
|
10% to 85 % RH (no condensation)
|
|
Storage Temperature
|
-10? to +80?
|
|
Storage Humidity
|
5% to 95 % RH (no condensation)
|
|
Power Requirement
|
|
|
External Power Supply
|
5V DC@2A
|
|
Regulatory Approvals
|
|
|
Converter Unit
|
FCC,CE,UL
|
|
Power Supply
|
UL,CE,FCC
|
|
Accessories Adapter
|
|
|
AC Power Adapter
|
Euro(**2 to 3 pin adapter not provided.)
|
|
User Manual
|
|
Notice:
1.In order to achieve the high transmission quality ,please choose the shielded CAT-5e or CAT-6 cable
2.The cables with lower quality will not achieve the perfect transmission effect and long distance
3.Theoretically the function of the product is normal when adopt short distance transmission.If the product cannot transmit long distance,this is to say,there are quality problems in the transmission cables
|
|
|
|
|
|
|
